Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that guards you against hacking and key-cloning. It also prevents vehicle theft. It can also reduce the cost of insurance and could even qualify you for incentives.
Simple and discrete easy to use, the Ghost immobiliser is integrated into the vehicle's ECU. This makes it impossible to start the engine without a secret PIN code.
TASSA Approved
Autowatch Ghost is the best way to stop your vehicle being stolen through key copying. It is certified by TASSA. This is the most recent in car security and stops thieves two ways - it will stop your vehicle from starting if your keys are cloned and also stops you driving away if they've stolen your keys.
This next generation device is connected to your vehicle's CAN data network. A personalized PIN code is entered using the standard buttons on the dashboard or the steering wheel. The Ghost then prevents the engine in starting and can be programmed to a number of different settings such as Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is totally undetectable and does not utilize radio frequency signals, so that it cannot be identified by RF scanning equipment or a code grabber.
The Ghost is a small, weatherproof device that is sealed to allow it to be concealed in the vehicle or placed on the dashboard, where it is almost impossible for a thief to locate. Contrary to other alarms and immobiliser systems available on the market this is not an Thatcham Category-approved product, but is recognised by insurance companies as an effective anti-theft system. It also comes with a five years of warranty.
The TASSA verification process ensures that any installation work carried out on the Ghost will be carried out by a qualified and experienced installer. This gives the customer's, insurers and police's trust in the quality of the installation. This will also ensure that the installers adhere to the instructions of the product manufacturer and correctly install the product. Installers who are members of TASSA have a clear commitment to excellence and have made a real difference in the fight against crime.
Compatible with a wide range of vehicles
The Autowatch Ghost 2 is a cutting-edge immobiliser that is designed to protect your vehicle from modern key cloning. The PIN code system of the Autowatch Ghost 2 is incorporated into the ECU of your vehicle, making it harder for thieves to clone keys or hack the system. It is also discrete and is able to be easily installed in various vehicles, including minivans and sports cars. It is also weatherproof, and small enough to be hidden out of sight. This makes it harder for thieves to steal it.
The installation procedure for the Ghost is simple and doesn't require any additional wiring. It is compatible with a range of vehicles and utilizes the CAN data network of the vehicle to communicate with the vehicle. Additionally, it can be switched off or deactivated from the vehicle's main screen. The device is compatible with numerous mobile apps that allow you to control the security of your vehicle remotely.
The Ghost may have some issues following installation, despite its many advantages. These issues could result from a variety of causes, including defective wiring or a mobile app that isn't compatible. In these instances, calling a professional installer is the best option to fix the issue.
Another issue that users face is difficulty entering the Ghost's disarm sequence. This is usually due to not remembering the proper sequence or not practicing it. However, the manual for the device includes an emergency code that can be used in the case of these issues.
Discreet
Autowatch Ghost is an advanced and discreet security system that safeguards against theft of vehicles. This device is invisible to thieves and uses the CAN data network of your vehicle to function. It also has the ability to be activated by other security systems, like alarms for cars, and provide real-time alerts to the owner. These features can help police in finding your vehicle if it is stolen.
This system can be installed in just a few minutes and is compatible with a majority of vehicles. It is a TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognise it. It's also tamper-proof and silent, meaning that criminals will not be able to hear the operation. The Ghost immobiliser can also be programmed to require a PIN of up to twenty digits. This makes it almost impossible to guess.
Ghost is only available only in the Service/Valet Mode. This will prevent you from accidentally giving the PIN code to a mechanic or other person who might need to access the vehicle's computer system. The Ghost also comes with a five-year warranty.
The Autowatch Ghost immobiliser is a revolutionary security device that prevents key copying, ECU hacking and car theft. It's an aftermarket CAN bus device that's a great choice for both new and old vehicles. It's easy to install and runs quietly, so it can be put in any vehicle without cutting wires. It also allows you to change your pin number easily so that only you are aware of it. The system also doesn't use codes-grabbing or RF scanning technology that means it's nearly inaccessible.
Easy to use
ghost immobiliser birmingham is an innovative and efficient security system that was designed to prevent theft of vehicles by shutting off the engine. It is based on a unique code created by the vehicle owner, that must be entered before the car can begin. This advanced technology enhances the overall security of your vehicle and is a preferred choice for motorists. However, this installation requires careful preparation and attention to detail. This includes ensuring compatibility, relying on expert knowledge in compliance with legal regulations, as well as understanding the Ghost II's operational complexities. Prioritising these aspects ensures a successful installation and the best performance.
The Ghost II is a silent system that can't be detected by thieves. It is also tiny and weatherproof, making it very difficult to get into. It is compatible with CAN Lenastark, CAN, as well as other vehicles. It is also able to be used in vehicles that require isolation of the battery for maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your vehicle is being loaned or rented out.
Before you can start the Ghost 2, you will have to enter a PIN code that is unique to you. Installers will create a default code, but it is best that you change it as soon as feasible to ensure your security. The device can go into sleep mode to save the battery, however should it detect an engine management system, it will wake up and stop the vehicle from getting started. This feature can be disabled within the Settings menu. It is best to use the Ghost immobiliser only when your vehicle is in motion and to lock it when you leave it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, prevents car thefts by removing the engine of a vehicle. It operates through a personalised code that only the owner can access which makes it a powerful protection against thieves. However, the installation process requires careful preparation and attention to particulars. By adhering to the legal guidelines and adhering to the laws, and relying on experts will ensure that the installation process is smooth and get the most out of this security solution.
This innovative CANbus immobiliser from Autowatch is easy to install, and works silently so criminals cannot hear it working. It uses CAN bus communication to communicate with the vehicle. It is compatible with a large variety of vehicles. It's a revolutionary advancement in the safety of vehicles. It protects you from car theft and key cloning. It's weatherproof and small which makes it difficult for criminals to detect it or modify it.
To begin working with your Ghost Immobiliser To begin, review the wiring diagram for your vehicle and find the CAN high (CAN H) and the CAN low (CAN L) wires. Then, connect the CAN high to the CAN low and the low CAN wire to the ECU. These wires can be found in the dashboard or close to the engine.
It is best to choose an installer who is licensed and reliable for the installation of Ghost immobiliser. You can be sure that the system is installed correctly and won't interfere in the operation of your vehicle. The installer will also be able provide advice on how to best make use of your new device.